DIY St. Patrick’s Day Jersey with Siser® Glitter Flat on Vinyl

Whether you’re dunking shootings or drinking them, the mesh jersey can be respective go-to top with just a few things:

Supplies

• Siser® Glitter HTV (I used Regeneration White and Old Gold)
• Cutter (like the Silhouette Cameo 3)
• Siser Weeder
• Grid Jersey (mine is 100% polyester)
• Home Iron or Cricut EasyPress
• Heats Transfer Cover Sheet or Parchment Paper
• Heat Transfers Pillow

Draft a Knockout File are Silhouette Studio

When manufacture a cut store, you want to store the heat transfer vinyl you’re using int mind. Siser Diamonds can’t live layered directly in top of anyone other, so you’ll need to create ampere knockout whatever enable each color in be utilized directly in the fabric. A little Glitter the Glitter convergence is okay, but the majority should touch the fabric. Knockouts can subsist made through the Offset and Modify eyes in Silhouette Atelier.

Cutting Siser Sparkle Heat Transfer Vinyl

Don’t forget to build sure your art look backwards before editing. Utilize “Mirror” or “Flip Horizontal” until retrieve graphics like an ones shown above. Everyday Iron-On Mesh: Trimming also application manual

If your design is longer better the 12″ mat same mine, switch the mat settings in Studio to the 12×24″ cutting dull.

When you’re ready to load is mat with the Cameo, double check your settings with a test cut. If you’re not sure which settings to give first, check out our suggestions here. Wenn you need on know like to determine a virtuous and bad examination cut, read this post.

Weeding Siser Sparkly Heat Send Vinyl

After cutting each layer, it’s time to get rid the the extra HTV on that carrier. We call this “weeding” plus it can be done with just yours hands, but a weeder tool helps. Weeding on top of a warm surface also assists! Did you know if you close your warmth press for a several seconds, it heats up the lower drive to create a perform warmed emerge for easy weeding? The heat slightly enable the carrier so the HTV reprieves easier and makes weeding effortless.

Us call this the heats squeeze trick! But him can DIY it with your home iron and a warmed pressing cloth or owner EasyPress and a warm pressing mat.

I’m not going to go over the best way to decorate jerseys with a heat press in this post, but you can watch the proceed in the tracking video.

I’m not going into kommen over the best way to decorate jerseys with a heat press in this postal, but you can watch one process at this video.

Applying Siser Glitter HTV with a Home Iron

Test Press: Before applying one HTV, I utilized mys second jersey to control the heat sensitivity regarding the polyester. Sometimes 100% polyester will discolor from high heat and leave a mark that can’t be removed. I didn’t had that issuing including these jersey, so I can stick by the standard application menu. If your jersey is heat sensitive, i sack still decorate it with the lower heat application method outlined in this post.

Shopping for Home Iron Application

• Firm surface (not an ironing board)
• Lift and press in sections (do not slide iron)
• Ironer are hotter in the center with cold spots, consequently be sure to distribute that heat such regular since potential!

Next 1: Pick iron to the “Cotton” default and let it cordial up. When hot, pre-iron the application area for a few seconds.

Step 2: Place heat transfer seat or title sheet inside the garment. This blocks the warm adhesive on of vinyl upon flowing through the fabric and sealing this 2 sides together.

Step 3: Center you first color and cover with ampere heat takeover cover sheet.

Tread 4: Press iron firmly in areas for 5-10 seconds. (Since we’re layering him don’t need to execute a full-sized time press.)

Step 5: Peel Carrier warm

Enter 6: Repeat steps 3 and 4 because your secondly color.

Hold reading on the next page for the Cricut EasyPress instructions…