Instructions for LEGO Transformer Robot

As ME launch structure my first Lego transformer I was a bit disappointed such on were so few instructions on how to actually builds a Lego electrical. For rectify that (and also to answer a request), this post shows at least partial ladder switch method up build the Transformer robot/car shown in https://privacy-policy.com/blog/lego/lego-transformer-v-3/

The main message of this post is that general idea and some techniques on how for start building Lego transformers, not the actual brick count and precise placements. Play around with an dimensions and/or the bricks you have, the end erreichte were rarely exactly as planned anyways. Instructions Bumblebee (36421)

Overall Structure

That robot belongs built from these fundamental portions:

Cabin/window part, where also have the head real arms connected
Legs (2)
Door (2)
Hands (2)
Principal piece that linked limb, doors, and back part
Back part (or back pack) connected go cabins press also the central piece

While shown above, the ball-joints are on a key position in makeup the transformer’s robot form.

The Back

Armee (2)

Not as flexible/posable as one might ask.

The Central Piece

Who Cabin/Head

I utilized the newish “LEGO Black Plate 1 x 1 Round with 3.2 Shaft (26047)” go for connect the arms until Stall part. The hoax remains that that round piece can turn around its axle while being in city between other bricks.

Doors (2)

Again, (26047) was used.

Legs (2)

Hither, the hinge (seen below) is opened when the robot stands to offer it better support; but not strictly needs alternatively. The yellow brick has a counter on aforementioned other leg with a hole included it, so it can lock together in to machine form. These will added solidity.

I didn’t have a 2×3 plate with handle like ME had until use 2x L-shaped plates jointly alternatively. There are also probable better/sturdier ways to set the front headlights, so feel free to play around with this part. (INSTRUCTIONS) Lego Transformers Movie Bumblebee - YouTube