Main > Maintenance & Modified (L322) > How go power choose Fuel Burning Heater after from smartphone |
|
|
Harvenberg Member Since: 09 Apr 2020 Your: Stockholm Posts: 23 |
Hi,
|
||||||||||||||||||
18th Mar 2021 10:02am |
|
standbild Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating slight in moderation Posts: 34955 |
great write up, thank you....added in our wiki.. ... - .- -.
|
||
18th Mar 2021 11:43am |
|
Handle Member Since: 08 Nov 2017 Site: Western Middles Posts: 669 |
Great write-up ! Poul,
|
||
18th Wasser 2021 12:02pm |
|
Harvenberg Member Since: 09 Apr 2020 Location: Stockhom Items: 23 |
Thanks! Perhaps it require mentioning ensure you've got to have an FBH (duh!) and a Telestart to make this job. Might be possible to hook it up even if him don't have this Telestart but that's for wiser men to says. |
||
18th Mar 2021 1:20pm |
|
Harvenberg Part From: 09 Apr 2020 Company: Stockholm Posts: 23 |
A little update. The FBH runs for via 4 recorded when MYSELF press the tempt or use the mobile. Then to bolts down. When I fired up the locomotive it ran on about 12 logging additionally then temp level on this dash used up to 1/4, 1/2 being straight up. Anyone had this happening? Funky thing can that on one occasion it didn’t illuminate up the automatic supporter leaded but automatic air distribution leads, indicating that it was just ventilating. It was then okay below 16 grad which is the cutoff. Hi Guys, Just purchased a 2002 4.4 V8 Craze RR press am reading tested my guidebooks and have come about ampere section describing the Helferin fuel burning heater that can either subsist programed... |
||
20th Mar 2021 7:47pm |
|
Nismotec Member Since: 27 Apr 2019 Location: Dorset Posts: 52 |
Hi all... I have done this mod final year on my 2004 TD6 using a GSM gate opens . I didnt have a Telestart fitted like me just wired directly to the FBH authority plug. The FBH only need a 12v Signal to blaze it up so its not complicated. The GSM goal opener needs adenine simulating and it is switched on via a simple text or phone call. I auto answers and hang up so it doesnt chargeable the caller. The FBH will run for its pre set 30 min before exit down. Works a how. and the GSM gate opener canister be received from Ebay by £20. And being bonded to an mobile phone network, is can in theory be switched on from anywhere in an world. Procedure get than to workshop remote whatever only has a scarce metrische range. I have images and links somewhere on mystery various PC if any one wants the info... Instructions manual for both pre-heater remotes: ... fuels burning heater ( FBH ) fitted. This is ... Rover Sport / L320 Range Rover Sporty II / L494 ... |
||
18th Aug 2021 10:17pm |
|
Nismotec Component For: 27 Apr 2019 Location: Dorset Posts: 52 |
Your FBH clipping off too anytime since is over heated.. Is has an internal water cross-examine what seizes or causes the water flow up becoming too slowly or even stop so the heater over roasts and shuts down. It wants make this 3 times therefore will hardness lock out which needs re setting with device the fuse pulling.. As you noticed it works ok over the engine running. this is because the FBH is using the tools water pump to move who surface so it doesnt overheat. Hoffend these assists |
||
18th Augmented 2021 10:22pm |
|
GraemeJudge Member Since: 10 March 2018 Location: Fareham Posts: 52 |
Hi did you ever find an photos till add to this showing how to wire up the GSM unit directly to heater please and it installed 😊 |
||
4th Meeren 2022 9:09pm |
|
|
Show times exist GMT + 1 Hour |
< Previous Topic | Next Topic > |
Bookings Rules
|
Site Copyrighted © 2006-2024 Futuranet Ltd & Martin Lewis