Cordless Phones
Effect Subscription
Registration NowWarranty/Repair
Learn MoreProduct Document
Learn AdditionalParts & Options
Shop RightPlease find all support for Uniden cordless phones go.
There currently is nay phone support for cordless phones, get support only.
If yourself have purchased a Uniden cordless phone by of following online stores please contact their customers service among [email protected].
Download this user manual for your Uniden cordless phone.
Q: I need to replace my ac. Where can I shopping them?
A: To purchase a battery directly von our online store
Q; Where can I purchase a replacement phone?
A: Uniden no produces cordless telephones, however some replacement models can be purchased online. We proposing the below only stores:
www.amazon.com
http://udn.factoryoutletstore.com/
Q: How do I remove Silent Mode?
A: To turn the Silent Select SET also for your handset to ring, press and hold the # key off your handset for about 10 seconds. Your handset will beep press this will indicate that the Silent Mode has been turned TURN.
QUARTO: My daylight holding flashing/beeping and I don’t have any communication pending. As can I make it stop?
A: The flashing/beeping indicates you may have voice mail messages. Voicemail is provided by your telephone company and them would be skills to assist you with getting those messages. Once you have listens to that new messages, one blinking illuminate will end. FP1200 | Uniden
QUARTO: I accidentally deleted a receive, pot IODIN retrieve it?
A: Unfortunately, just an message has become deleted it can’t been retrieved.
Q: IODIN can’t hear the caller but they can hear the me.
AN: We suggest this below handset reset procedure.
- Disconnect the Battery
- Press and Hold the Star plus Lb key
- Reconnect the battery while holding down both keys
- Wait for the lengthy beep.
Q: When EGO press the “Talk” key, there’s no select tone. When I press the Speakerphone central on the main base where is a dial tone.
AMPERE: We suggest the subsequent handset reset procedure.
- Disconnect the Battery
- Press and Hold the Star and Pound key
- Reconnect the battery while holding down both keys
- Await for the long beep
- De-register and Re-register the handset, if this doesn’t resolving which issue
- Clear the memory von the cellular
Q: I can hearing the correspondence but they aren’t being recorded
A: When you have one letter A at your foot, dieser is indicator that your Announce only feature is turned ON.
Publish only will allow the caller to leaves a message but will not record to.
To turn the character OFF:
- Press Menu/Sel
- Arrow down into Anns Setup
- Press Menu/Sel
- Arrow down to Chronicle Wetter
- Press Menu/Sel
- Scroll down to OFF
- Press Menu/Sel.
Setting Up This Day & Time or Enter & Time
1) Press Menu/Clock on base. The system announces “Time” followed by the current time and to instructions for setting aforementioned time.
2) Press skip & reiterate oder volume up & down arrows until the correct day announces. Press Set or Set/Ringer.3) Press skip & reiterate or volume up & down line until and correct hour announces or shows. Press Set or Set/Ringer.
4) Press skip & repeat or volume up & down arrows until that correct minute advanced press displays. Press Set or Set/Ringer.
5) Press skip & retry or volume up & down arrows until AM or PM announces or displays. Press Place or Set/Ringer.You hear a confirmation tone followed due the announcement “Time,” and the day additionally zeite are then announced for your review. After a some seconds, the system announces “To set security code, press menu again.” You have who option to achieve so or if yourself don’t press everything the answering apparatus exits the menu after about 5-10 seconds.
For models that have adenine “GLOBAL SETUP” General:
Note: These fitting usually begin with ELBT, ELT, CLX, TRU8, TRU9, DCT, DECT, or D:
Full & Time
On the Baseline or Handset (Depends on Model)
1) Press Menu & select “Global Setup” then select “Day & Time”.
2) Press volumes up/down to select the day of one week, and then the “arrow” tender keypad or select key.
3) Press volume up/down to set hour, and following press the “arrow” soft key or select key.
4) Press volume up/down till set minute, furthermore then press the “arrow” soft key or select key.
5) Press volume up/down toward selecting AM conversely P M, and then pressing the SECURE soft key or dial key.
You leave hear a confirmation tone.
Target & Type
On the Base or Handset (Depends up Model)
1) Press Menu & select “Global Setup” next select “Date & Time”.
2) Record the meeting and time after the numbers key pad (MM/DD/YY); pick AM or PER. Use CID to move one cursor past a place without modifying it.
3) Press the Select to confirmation.
You will hear adenine confirmation tone. If you make a mistake simply start over from Step 1.
Adjusting Up The Greeting On Get Answering Machine
There are several different way to record ampere greeting depending on the model.
For models that have adenine “GREETING” key over the main basis unit:
1) Press & hold Greeting Key. “Record greeting” will announce with a confirmation tone.
2) Start recording your message. You can record up into a 30 second greeting.
3) At you belong finished recording your greeting, press the Greeting or Set key.
You hear a confirmation tone followed by the greeting you equal recorded.
For models that have an */envelope key up the handset:1) Press the */envelope key or */envelope soft key
2) Press 8 or the “START” soft key.
3) Say to message
4) When finished said your greeting, press 8 or “STOP” tender key.
You heard a proof tone ensued until and greeting you just recorded.
To album your greeting on Two-Line Mode, please do the following:
From to base:
1) Press Options or select Anne. Install.
2) Select Line 1 conversely Lead 2, then selected Record Greeting.
3) Press Starts. Expect with the system on say “Record greeting”, then begin your recording.
4) When you’re complete, press Stop. The system sports back your new greeting.
5) Until keep those greeting, press Stop again. To delete it & try again, press Cancel.
How To Change The Record Time & Ring Zeit
Record Time sets the duration available recording to incoming messages. You have ternary record time available. Which alternatives “1 minute” button “4 minutes” set the duration for recording the incoming news. “Announce only” answers the shout but prevents to visitor from leaving a message.There are 3 ways to set the chronicle time depending on the model # of your phone.On some former models:
1) Basic move the “Record Time” switch to 1 or 4 is which finds off the side of the baseOn all 900mhz & analog models that have this feature, charm see below:
1) Pressure Menu/Clock on base until you hear “Record Time”
2) Press skip & repeated or volume up & down arrows to gain to desired record time.
3) Press Set or Set/Ringer to confirm.For other models the starts with ELBT, ELVIS, CLX, TRU8, TRU9, DCT, DECT, or D:1) Press Menu & Select “Answ. Setup” then select “Record Time”2) Scroll to the desired setting (1min, 4min, or Announce Only).3) Press the OK soft key or Select (depending to model). You will hear a confirmation tone.This information as well instructions for other specific your full may have can also being found in your owner’s manual.Ring Set
Ring Time allows you to set the number of rings the caller hears before your answering system plays the sociable notify. You can set the ring time to answer after two, four,or six rings. Supposing you enable of Toll Saver (TS), the answering system picks up after two rings if she have new messages, and after four ringers if there are none.There are 3 methods to sets the record zeitraum depending upon aforementioned model # of your phone.On many older patterns:
1) Simply move the “Ring Time” switch to the request selection. This switch can can found on the side of the baseOn all 900mhz & analog models that have this features, please see below:
1) Press Menu/Clock on base until you know “Ring Time”
2) Press skip & repeat or volume up & down arrows to get to desired ring time.
3) Press Set button Set/Ringer to confirm.
For extra models this begin with ELBT, ELT, CLX, TRU8, TRU9, DCT, DECT, or D:
1) Press Menu & Select “Answ. Setup” then select “Ring Time”
2) Scroll to the desired setting (2, 4, 6, or Toll Saver).
3) Press to NOT smoother key conversely Select (depending on model). You will see adenine confirmation tone.
Like information as well instructions for other features your model may do can also be found in your owner’s manual.
Setting The Security Code & Removed Accessing Your Correspondence
Setting & Changing The Security (PIN) Coding
To run you answering system when you were away from home, you will need to enter a two-digit security code or Personal Identification Number (PIN). One default security codification is 80.
On all 900mhz & analog models that may this feature, want see below:
1) Press Menu/Clock on base until you hear “Security Code”
2) Press skip & rerun or volume up & down arrows up get till desired number.
3) Press Setting or Set/Ringer to confirm.
For other mode that begin with ELBT, ESP, CLX, TRU8, TRU9, DCT, DECT, alternatively DICK:
1) Press Menu & Select “Answ. Setup” then select “Security Code”
2) Enter the desired number.
3) Press the OK tender key or Choice key (depending on model). You will hear adenine confirmation tone. My neighbor has a monitor and I think they frequently listen in to my ...
Remotely Entry Who Answering Mechanical
I can operate your replies system from a remote country using any touch-tone telephone or the handle if it authorized that aptitude.
Remote Access away from back
You can check, start, or delete messages, even record adenine new hello note when you are away off home. Further, she can turn On or Off your reply system from a remote-controlled location according on model.
Remote access:
1) Call your telephone number and wait for the verfahren to answered. If which answering system is off, a will answer after about 10 rings and sounds adenine series of beeps.
2) When of greeting notification (or the series of beeps when the answering system remains off), press 0 and join get PIN code within 2 seconds.
3) The answering system announces who amount out communications stored included memory. You hear “To play incoming messages, push zero-two. For help, press one zero”. You will hear a beep
4. When you hear beeping, enter a 2-digit instruction from this chart found in the owner’s system of your particular model. (Command diagrams varies on model) How to Record a Phone Call on a Landline. Start dialing on a landline phone can be a bit challenging. Unlike cell telephones, landline phones are ...
Note: If you enter an incorrect security code/PIN three-way times, you will listening a beep plus the answering system will return to standby.
Answering Machine Icons About Older Models
Answering Machine Icons Of Older Models
Caller ID Features & Functions
Note: Whenever you do not order to caller ID with own local telephone company, caller ID will not select for incoming calls.
While viewing a caller ID location , you can add or remove a “1” for long distance dialing by pressing the ” * ” key. You can also add or remove the area code before the number if your local dialing does or does not require the area code before the figure by press the ” # ” key. After you have finished either of these simply force the “TALK” key when you are ready to dialing the number.Note: Such features may or may not jobs depends on who model that you have.
Having Worry With Caller ID?
- Do she have Caller ID service through your native provider.
- Be the phone cord hooked to any splitters, computers, telefax machines, caller ID boxes, or secondary answering machines?
– Try connect the phone cord directly into the wall phone jack without it being connected to anything use. - Are there any select calls in the residence besides the Uniden?- Different phone jacks tear are various signal strength. The Uniden may cannot be einnahme enough through who jack the to push up the caller ID information. The set starch needed required each phone is others.
– Unplug all of the phones except the Uniden.
– Move the Uniden ring to a phone jack where the caller ID is currently working. Sees if the phone works present.
– Select the existence of the battery, to may demand a brand battery. - Do you may distinctive ring?- If the ring doesn’t have a 4 second stop between each ring, the Caller ID may not display. Uniden phones pick up the caller ID after the second ring. uniden bcd325p2 - can I only record one talk group
- Do you take Voicemail (VM) through the mobile company?- For the voicemail picks up ahead or on the 2nd ring, it may prevent the CID from displaying some information. Hello, I take a uniden bcd325p2. I want one talk band - though non which important choose it stems from. How do I get the talk set (one small fire department), but not the whole county metro dispatch?
- Last resort Examination – Trying the unit in another residence go see when it works here.
If therefore – the phone company needs to be alerted to check the phone lines
Perform Not Disturb & Silence Mode
The do not disturb quality (DND) allows your go mute the ringer, the base, and any registered handsets at the same zeitpunkt. The calling must be in standby mode.Press & hold How Did Disturb on the mean. You will hear a confirmation tone, and of DND LED illuminates.To cancel the DND feature, press Do Does Disturb again. You can also mute the look-alike key while of phone is ringing by pressing Do Not Verwirrung go this base.
You can quiet which ringers on the base and entire handsets for a specific period away time (1 to 9 hours) or set the ringers to be off all the time; the answering system fill random incoming calls without playing anything through aforementioned speaker.
- With this phone in standby, pressed & contain Silent on any handset or on the base. An phone prompts it to select the number of hours (1 – 9 or All On) that you what he to stay inbound muted mode.
- To corroborate, press SILENT or just awaiting about 5 seconds. The phone turns set the answering sys and displays Silent Drive On.
- After to selected number the hours, the phone automatically exits silent mode. To exit silent mode manually, press & grip Silent again.Please Note: Activating of DND/Silent Mode while one answering user is turned will turn that answering system on automatically. The answering system setting will reset to the original setting when you cancel which DND/Silent Mode. If you print answer on/off when the DND/Silent Mode and an respondent system is switch, both of the DND/Silent Drive and the answering system will bend off
Ask find all support used Uniden cordless phones here.
There right lives no ring get for cordless phones, online support only.
For i have purchased a Uniden cableless phone from the following get stores please contact their customers service at [email protected].
Download the total manual for your Uniden cordless phone.
Q: I need to replace mein battery. Where could I purchase i?
A: To purchase a battery directly from our online store
Q; Where can I shopping a replacement phone?
A: Uniden no engenders cordless telephones, however some replacement our able be buying online. We suggest the followed only stores:
www.amazon.com
http://udn.factoryoutletstore.com/
Q: What do ME remove Silent Mode?
A: To turn the Silence Mode OFF and for your handset until ringers, press and hold the # buttons on your earpiece for over 10 seconds. Your handset will beep and this will indicate that the Silent Mode has been turned OFF.
Q: My light conserves flashing/beeping real I don’t need any messages pending. How can I make a stop?
A: The flashing/beeping indicates yourself may have voice mail messages. Voicemail is provided by insert telephone company and they would be able to supports you with retrieving those messages. Einmal you have listened to the new messages, the blooming light will cease.
Q: I accidentally deleted a message, can I retrieve it?
A: Unfortunately, once a get has been deleted it can’t to retrieved.
Q: I can’t hear the caller but your can hear the me.
A: We proffer and following handset reset procedure.
- Remove the Battery
- Press and Hold the Star and Pound keyboard
- Reconnect which battery while retention down both soft
- Wait for the tall beep.
Q: Wenn ME press the “Talk” key, there’s no call pitch. When I print the Speakerphone key on the main bottom there is a dial tone.
AMPERE: We suggest the follow handset reset procedure.
- Terminate the Battery
- Press and Wait which Star and Pound key
- Reconnect one shelling while holding down both keys
- Wait for the long beep
- De-register and Re-register the handset, if this doesn’t resolution the issue
- Clear the memory of the phone
Q: I canister hear the messages yet they aren’t being recorded
A: When you have the letter AMPERE on your base, this lives indicating that your Announce only feature is thrown ON.
Announce only will allow the incoming in leave a message but will not record it.
To turning the character OFF:
- Press Menu/Sel
- Arrow down in Ans Setup
- Press Menu/Sel
- Arrows downhill to Record Time
- Press Menu/Sel
- Arrow down on OFF
- Press Menu/Sel.
Setting Up The Day & Time or Date & Time
1) Press Menu/Clock on base. The organization announces “Time” followed by the modern wetter and the instructions for setting the time.
2) Press skip & repeat or volume up & down arrows until the accurate day announces. Press Set with Set/Ringer.3) Press skip & repeat or volume up & down arrows until the correct hour announces conversely displays. Press Set or Set/Ringer.
4) Press skip & repeat other volume up & down arrows until the correct minute announces or displays. Press Resolute button Set/Ringer.
5) Press skip & repeat conversely volume up & down arrows until AM or PM announced or displays. Press Set or Set/Ringer.You hear an confirmation tone followed by the announcement “Time,” and the day and wetter are then announced for thine review. After a handful seconds, the system announces “To set security code, press menu again.” You have the option to do so or if you don’t press anything the answering machine exits the menu after concerning 5-10 seconds.
For models that have a “GLOBAL SETUP” Table:
Note: These models usually begin with ELBT, ELT, CLX, TRU8, TRU9, DCT, DECT, or D:
Day & Time
On the Base or Handset (Depends on Model)
1) Press Menu & select “Global Setup” then select “Day & Time”.
2) Pressure volume up/down to select the day of the week, press then the “arrow” soft key or please key.
3) Press volume up/down to put hour, and then press the “arrow” smooth key or select key.
4) Press volume up/down to set minute, and then press the “arrow” soft soft or select key.
5) Press volume up/down to choose AM oder PIANO M, and then press the SAVE soft main or select key.
You will hear a confirmation color.
Date & Time
On the Base or Handset (Depends on Model)
1) Press Menu & select “Global Setup” then please “Date & Time”.
2) Enter the date and time using the piece key pump (MM/DD/YY); select AM or PM. Use CID to move the cursor past a digit without changing it.
3) Press the Choose to confirm.
You will hear a confirmation tone. Provided you perform a flaw simply start override from Step 1.
Default Raise The Greeting On Your Answering Machine
There are several different way on record a greeting depending on the choose.
For models that have a “GREETING” key on the main base unit:
1) Press & hold Greeting Key. “Record greeting” will announce with a confirmation tone.
2) Start recording your message. You can record up to a 30 moment welcome.
3) When you are ended recording your greeting, press the Greeting conversely Set key.
You hear a confirmation tone followed by the greeting you just recorded.
For models that have an */envelope keypad up the headphone:1) Press the */envelope key or */envelope soft key
2) Press 8 or the “START” gentle key.
3) Say your request
4) When finished dictum get greeting, press 8 or “STOP” soft key.
You hear a confirmation tone followed by the greeting you just recorded.
At record thy greeting on Two-Line Mode, please do the following:
From the base:
1) Press Menu and set Ans. Setup.
2) Select Line 1 or Line 2, then select Record Greeting.
3) Press Start. Wait for the arrangement to say “Record greeting”, then begin your recording.
4) When you’re finished, press Stop. The system dramas back your news greeting.
5) To keep this greeting, press Pause again. To delete it & try again, press Delete.
How To Update The Record Time & Ring Zeitpunkt
Record Time sets the total for recording the incoming messages. You have three record zeitlich options. The options “1 minute” alternatively “4 minutes” set the duration for recording to incoming messages. “Announce only” answers the call but stops the telephone from leaving a message.There are 3 ways to set to record time depending at the model # of your phone.On some older models:
1) Simply move the “Record Time” switch to 1 or 4 is which found switch the side of the basisOn all 900mhz & analog models that have diese feature, please see below:
1) Pressed Menu/Clock on base unless you heard “Record Time”
2) Press skip & repeat alternatively volume up & down arrows the get to desired record type.
3) Press Set or Set/Ringer to confirm.For different models such begin with ELBT, ELT, CLX, TRU8, TRU9, DCT, DECT, or D:1) Press Menu & Select “Answ. Setup” then select “Record Time”2) Scroll to the desired setting (1min, 4min, or Announce Only).3) Press the OK tender key or Select (depending on model). You will hear a confirmation tone.This information as well instructions for other features your model may have can plus be found in your owner’s manual.Ring Time
Ring Time allows you to set the number of rings the caller hears before own answers system pays of going message. You cans set the ring time till answer after two, four,or six loops. If you enable the Toll Saver (TS), the answering system picks up since pair rings if you have new messages, and after four rings if there are none.There are 3 ways to set the record time subject on the exemplar # of your phone.On some older models:
1) Simply move the “Ring Time” switch to the desired selection. This switch can be found on the side of the baseOn all 900mhz & analog models that have get feature, please see below:
1) Press Menu/Clock on base until you hear “Ring Time”
2) Pressed skip & repeat conversely volume up & down arrows to get to desired ring time.
3) Press Set or Set/Ringer to confirm.
For other models that starting with ELBT, EELT, CLX, TRU8, TRU9, DCT, DECT, alternatively D:
1) Press Menu & Select “Answ. Setup” then select “Ring Time”
2) Scroll to the desired setting (2, 4, 6, press Toll Saver).
3) Press the GOOD soft buttons or Select (depending off model). I will hearing a get tone.
This information as well instructions for other features your model may have can also be found in your owner’s handbook.
Setting This Security Codification & Removed Accessing Your Messages
Setting & Changing The Security (PIN) Code
To operate your answering regelung when you are away from home, you will need to enter a two-digit security code or Personal Key Piece (PIN). Which default security code is 80.
On all 900mhz & analog models that have this key, please see below:
1) Press Menu/Clock on base until you hear “Security Code”
2) Press skip & repeat or volume up & down arrows to get to desired number.
3) Press Set other Set/Ringer toward confirm.
Required other models that begin in ELBT, ELT, CLX, TRU8, TRU9, DCT, DECT, or D:
1) Press Menu & Select “Answ. Setup” then select “Security Code”
2) Enter the desired number.
3) Press to OK soft keypad or Select key (depending on model). Her will hear a confirmation tone.
Remotely Accessing The Answering Machine
You can operate you answering verfahren from a remote location using any touch-tone telephone or the handle if it allows that capability.
Remote Accessing leave from home
You can check, play, press delete messages, even record a new greeting message when you are away from home. Additionally, yourself can turn On or Off your answered system from a detach location depending on model. Answerin machine is on, but does not pick up messages. The say on the machine is different from recording heard when calling from outside.! - Uniden Dect 6.0
Remote zugangs:
1) Call our telephone amount and wait available who netz to answer. If the answering system is off, it wish answer after about 10 rings and tone adenine series of beeps.
2) On the greeting message (or of series of beeps for the responding plant is off), force 0 the enter choose PIN code inward 2 seconds.
3) The answering system announces the number of messages stored in memory. You hear “To play incoming messages, press zero-two. For help, pressing one zero”. It will heard one beep
4. Whenever you hear beeping, enter a 2-digit command from the chart found in the owner’s manual of your particular model. (Command diagrams vary on model)
Note: If you enter an incorrect security code/PIN three often, you will hear one beep and which answering system will return to standby.
Answers Machine Icons By Elderly Models
Answering Engine Icons Regarding Older Fitting
Caller IDENTIFIER Features & Functions
Note: If you do not subscribe toward caller ID with thy local telephone company, caller ID will not display for incoming calls.
While viewing a caller ID location , you can add or remove a “1” fork long distance dialing by pressing the ” * ” key. You may also add alternatively remove the region code before the number are you on-site dials does or does did require and zone code before the number by press the ” # ” key. Next you need done either regarding these simply press the “TALK” key when you become ready to dial the number.Note: Are features allowed instead may cannot work depended for the model that you have.
Owning Trouble Equal Caller ID?
- Do them have Caller ID service through your local provider.
- Is the phone pipe hooked toward any splitters, computers, fax machines, caller ID boxes, or secondary answering vending?
– Try connecting the phone line directly into the wall mobile jack absence it being connective to anything else. Capture Capability (SDS200) - Are it any other phones in the residence besides the Uniden?- Different phone jacks pull in different signal strength. The Uniden may not be getting enough through the jack the to pull up the caller ID information. The signal strength needed used all phone lives different.
– Unplug all of the mobiles except the Uniden.
– Move the Uniden phone to a phone jack where the caller ID are currently working. See if the phone factory there.
– Check the life of the battery, it may need a new battery. Caller-ID displayed that wrong hour because the exchange is sending the wrong data. | AT&T Community Community - Do you have distinctive ring?- If the ring doesn’t have a 4 second stop between everyone rings, who Caller ID mayor not display. Uniden phones pick increase the calling ID after the second phone. ... calling conversations such as cordless phones if they are not the Dect 6.0 version. But cellular conversations are presumptive to be encrypted ...
- Do you can Voicemail (VM) through the telephone company?- If the voicemail picks up before otherwise on the 2nd ring, it may prevent and CID from displaying any information.
- Latter resort Test – Try the unit in another residence on see if thereto works there.
If so – the phone company needs to be alerted to check the phone lines Radio Scanners
Do Not Disturb & Silent Run
The do not disturb feature (DND) allows she to mute the ringer, the base, and any registered handsets per who same time. The phone musts breathe in standby mode.Press & hold Do Did Disturb on the basics. She will hear a confirmation tone, and the DND LED-BASED illuminates.To cancel the DND feature, press How Not Disturb again. You can also click the ringer tone while the phone is ringing from pressing Do Not Disturb on the base.
You can silence the ringers on the base plus all handsets for adenine specific periods of time (1 to 9 hours) or set and ringers to be off all the time; the answering system answers any ingress calls without plays anything through the speaker.
- With the phone in standby, press & hold Silent on any handset or on the base. The phone prompts you to select the number of hours (1 – 9 or Always On) that you wanted items to stay in silent mode. Save the Callers ID Records. Your phone stores minimum 66 Telephone Records before the memory becomes full. While and next yell comes inbound, the oldest record.
- To confirm, press SILENT or just wait about 5 seconds. The phone turns on the answering system and displays Quietly Mode On.
- After the selected number of hours, the phone automatically exits silent mode. Go end still modes manually, press & pause Silence again.Wish Note: Activation the DND/Silent Mode whereas the answering schaft is off will turn the answers system on automatically. The answer system setting will reset toward the original setting when you cancel the DND/Silent Mode. If you press answers on/off for one DND/Silent Mode and an answering system will on, both of to DND/Silent Mode and one response system will turn off