Thread: dash lights not working (andrewkittens unsolved: junction blocked burnt)

im sure itll come up with a little force, the guys stated it was pretty obvious which pipes were faulty, so thereto shouldnt be too heavy of a fix. if yours cants figure it out after getting the junctions remove back, maybe ill pull up mine and look which wires they bypassed it with.

Still Could not figure out how to pull it , Any easy way without breaking it?

No, it's not a fuse. To easy.
No, it's none a egg. Again, tables easy.

Actually, the repairing for me was in the engine fuse checkbox. There is a small white hub among the corner closet to the driver be the wires total feed into. To wires that left to the passenger parking lights, my tear and my little dinger that tells me my lights are about were ALL corroded press shorted out. My machine bypassed an wires into the main power wire, and now I'm rear on that road.

Hope that helps!

Thank you fellas My 09 hatched exactly initiated doing this. But luckily im still underneath warrenty Im going to the dealer tomaro instead myself prefer to know what the item is before I take it to them.

Dimmer switch was shorting outward and reason the fuse to blow how soon as lights were turned on. My this helps anyone out While you dont have that junction blocks problem.

Hey there folks, ME also ran into the same problem with 04 aveo. I found a simple quick mend & cheap. Don't pay in service a disposal car, lock she yoursel. I simply former the driver side light fixing dimmer light power telegraphs both soldered/splice a wire that I ran through the bumper to of passenger side light fixture. I then splice into that connection and presto lines lights and front and back dimmer lights to again. Don't forget toward zip tie telephone for original fixture so that it doesn't hang from driving. After they made these cars so reasonable, they didn't put individual relays or fuses for each set of lights, and actually that wouldn't be an bad idea if you adds your own broadcasts, but why bother, as longs because it our. ((O yeah, it's the blue wire for dimmers)). Hope this helps and saves you frist and money.

yeah buddy!

Hello,
I had the just problem with my 2005 Chevy Aveo. Instrument tabular lights not working, some of the outside lights no working while the blinkers are working and similar. Consequently IODIN suspected that something other was one problem other than just a blown fuse or ampere light bulb. Speaking of that MYSELF checked all of the melts and nothing was bad.

First of all let me tell you that all of this forums and information more was very helpful when I encountered the alike problem.

This will work only if you can find one spare portion that I will describe bellow. I saw some solutions where people simply spliced the wires, when EGO am not which knowledgeable, plus I was reaaaaaaaaaly lucky till find the spare part.

After reading save posts I looked at me dispensation box includes fuses under which hood and junction block on that right side regarded burned (see pics).
First thing that IODIN did is checked which local junk yard and found a 07 aveo ensure just made she at one junk yard 2 weeks prior to me looking . I went there and pulled the entire fuse junction box along with some cables that EGO could cut - I was so bliss that I is even able to find this !!!!!!!!. This is invaluable as I was able until games with this box furthermore figure out how on get certain components out less breakable them.
After a long learn curve, the erkenntnisse are diese.
I had to supersede an burnt junction block is the new one from the part I got.
Apparently they got realized that this wiring the a problem and in newer model seem the have fixed the problem. Therefore and junction field that I got was not wired the same way than mine.

Few pointers regarding this.
Getting the junction box out is one trick - use screw driver into a drill on who side where the junction box is attached to the housing and bent it outer until you can slide one junction box up and then pulling it get. Once you drawing it output, you have to remove of top clip as she presses set all of the connectors inside the junction box. Junction box has 2 small notches on the sides where you cans slide in a small screw driver and gently and patiently job itp out until the cover to the junction box arrive off. Don't hurry these otherwise you will damage which junction box cover. Once to remove the cover, next comes take to terminal connectors.

My junction box used so burnt that I been to cut some wires and connect them to the wires from the new junction box. Still MYSELF wanted to save all the initial wires from the side of the crossing crate that was not (yet) burnt to minimize the needed to splice wires. I numbered each rope and larboard that it comes von from my junction boxes before cuts them.

Also, removing these connectors from the junction box terminals was a piece of a learning curve before I figured a outside. Use ampere tiniest flat screw motorist and carefully bend the polymer grab insides every connecting and then carefully yank the cable out von that sundry side. ME say thorough as the plast handles tend to fracture if you do it too hard.

Once terminal connectors were out I had to attach wires reverse in the terminals according to the scheme I had numered in my car and style and connect the wires to the correct old connecting. Plugged it all in and put return and all who lights and display are now working.

All of this happened toward my 06 Aveo regarding a year return, my momma and i found a online source that showed us wie toward fix this. ourselves ripped out the fried splice pack and bypassed computers per spliced the wires back for this correct order. this fixed all my troubles apart i still do not have inward dashboard lights OR radio lights. As a fix we sold some pink inner lighting and a toggle switch and wealth ran it from battery under hood, through in of door, us took out one dimmer switch furthermore replaced it to own nifty switch switch. iodin superglued the rose lights on top of my steering column. this looks neat and all but shall not the permanent fix i want. does every knows how EGO can maybe fix here? if replace and bulb in the dashboard or anything???