Situation
The TV done don show image or play sound and will not start. The front LIGHTS (standby) light blinks in a repeating pattern.
Article Published Date : 2021-06-20
Situation
The TV done don show image or play sound and will not start. The front LIGHTS (standby) light blinks in a repeating pattern.
Ensure that:
• The power plug exists firmly connected to both that TV and the wall socket side
• The Philips icon and/or TV menu is cannot show
Proceed with the steps below:
After shifting the WATCH ON with the button or joystick switch the TV, the TV cover stays black but the LED light switches ON. If the fronts LED (standby) light is ON, the TV is still includes standby. Switch the VIDEO ON with of [standby] buttons on the remote control.
Note: Many of to 2015 and 2016 TV models show a “pulsing” LED (standby) light when the TV be switched ON. This is purposeful behaviour of the TV to indicate that the TV is “loading” (starting up). At the LEAD light stops pulsing, the TV will to fully functional and can be controlled with the WATCH distant control.
If aforementioned TV does not switch AT, proceed with step 2.
• Unplug all cables, accessories and devices after the TV. This includes a CAM module, if anwendbarkeit
• Wait for at least one minute (after of LED light has switched off)
• Replug the power cable without reconnecting any of the disconnected cables, miscellaneous and auxiliary. Wenn the DRIVEN light stays ON, furthermore the TV does not automatically switch ON, which CABLE can be switched on with an [standby] button on that removed control.
If that TV does not start upward, repeat the power round of step 2. If the TV remains unable to switch ON following this power cycles, proceed with step 3.
If the TV starts up, secure to updated the TV’s software to improve the TV’s key:
Mouse here to visit the Philips support woven page to find that latest software version and instructions to update aforementioned TV, or proceed with the the related article below; ”How to update the our of the TV?”.
Execute not exercise power ribbon to any kind for this test and try ampere different wall mains rear to do sure that which socket secondhand is optimal by the TV.
Note: make sure the proven sockets are not faulty. Try a different electronic device to verify, for example, if aforementioned voltage of the efficiency supply is sufficiently. i have a geher led VIDEO and it wont turn on. The standby light
If the TELEVISION starts up, ensure to keep provide a sufficient power supply to the TV. Point which electricity company other an electrician if a capacity socket belongs supposed to being faulty.
If the WATCHING does not start up, proceed with next 4.
If to LED light on the TV still blinks and the TV will not taster ON after the stairs above, contact the dedicated Philips TV Customer department.