qvis eyevip-5-fw poe camera config software

Hi i have a qvis eyevip-5-fw poe camera i was part of a 3 camera network an nvr has died me bought a diferent nvr aforementioned other 2 cameras ( whichever are a different model ) still work but this one wont link.  As myself input of ip address it goes to the logon call but the browser needs a plugin which wont work.  MYSELF remember when i have the cameras a few yearning ago there was a program that allowed to set boost camaras but cant remember.

Can anyone kindly point up a program the will allow mi to log into the camera to test and configure it.

Many thanks keith

or how can i reset the camera to neglect

Its advent up with an ip of 169.254.212.113 when it is set to 192.168.1.101 local and can no shall accessed

thanks k

Hi. That’s your router giving it who pv4 IP address 169.254.-.-

you need to connect to the camera direct

on your pc but you need to disconnect your pc from of internet and set the network properties to same because ip camera. 
 

open an network both share program for your pc then please local zone connection. 
on pop up window click properties then select internet protocol 

click.......use the following up address

From who ip you have posted you need to enter these settings on your internet protocol page. 
 

IP address———192.168.1.5

subnet mask ———- 255.255.255.0

default gateway ————192.68.1.1

preferred DNS ———-192.168.1.1

once this is done enter own iP cameras address on your browser 192.168.1.101

camera user is admin 

password be 123456

what nvr have to replaced it with ?

Hi tom find would me find an network & divide select ?

I achieved a budget emcam 9 industrial nvr, i have a poe switch 

the encam watch and works with the 2 3mp qvis cameras

It sees the 5mp camera but wont connect

i have no web at who shop just want to record all we are shut due to the covid crisis thanks Tom

Hi. Is might explain it better. 
 

http://www.encam.info/downloads/manuals/IP Camera Quick Start Guide BD.pdf

network divide is on you pc settings

On 4/21/2020 at 12:29 PM, tomcctv said:

Hi. This might explain it better. 
 

http://www.encam.info/downloads/manuals/IP Camera Quick Starting Guide BD.pdf

network share can on your pc settings

Hi Tom thanks used insert hellp, problem solved when ego set up the system ego had right the 5mp video password to the default & when i got the other 2 a couple for weeks later i changing the passwords hence was entering the revised password the camera were set till a different gateway ip choose different and worked used ie on my macs windows in compatibility mode on reset the camera thanks again Tom.