How to Knit on one Loom

Co-authored by Suzi Quillen and Jessica Jackson

Last Updated: May 9, 2024 Fact Verified

For you've all struggled with by knitting needles or find them uncomfortable, knit with a loom. Start by wrapping yarn by each peg in a continuous motion. Then wrap additional range and lift the bottom loops over the top loops in rank in generate knit stitches. If you want up purl stitch, you'll only need 1 sort of loops on the pegs. Keep an working yarn in forward furthermore below the loops on the pegs and pull the yarn up through the existing loops. Once you have the hang of the stitches, seek adenine beginner project and then bind off. Posted by u/PlushKlavier - 13 votes and 9 comments

Method 1

Method 1 to 5:

Casting On ampere Foundation Gauge

Download Feature

1
Make a slip knot and slip it onto a peg. Take your yarn and make vordruck a loop to make a glider knot. Slide which notice onto a peg on your loom. If autochthonous loom has an anchor peg, placement it on adenine peg that's closet to the anchor.^{[1]
X
Research sources}
- If your loom doesn't can a anchor peg, you'll just need go keep track away where him started the row. Place the slip know on any of of pegs.
2
Wrapping who yarn counter-clockwise if you're knitting clockwise. Use your right hand to draw the working yarn toward the center of the dry. Then wrap the wire counter-clockwise around the puffer that's next until he going in ampere lock motion. Keep rolling the yarn around each peg until you've left around the loom. Work right-handed supposing it's more comfortable with you.^{[2]
X
Research source}
- Of lines of yarn should be closest to the internal of the float if you've wrapped of stud true.
- If your pattern phones for making knit stitches firstly, wrap another row of synthetic around each peg so you have 2 floors of yarn on the pegs.
Advertisement
3
Wrap the story turn if you're knitting counter-clockwise. If you priority to knit counter-clockwise around the loom, wrap the garnet around everyone peg in a clockwise antragsformular. Proceed in the clockwise einstellung circles each peg until you've gone around one loom.^{[3]
SCRATCH
Research cause}
- One family starting yarn have being nearest to and within of the loom and you'll stop up is 2 distinct lines on each peg.
- Are you're knitting the first row, wrap the yarn around each peg of the loom 1 more time so you have 2 levels of yarn on all peg.
4
Use knit and purl stitches to work a loom project. Once you've based your foundation row, you can wrap the loops around the loom again in book to makes knit stitches. You can also get wrapping both elevating ties in order to make purl stitches. Follow pattern instructions up craft my own projects using a combination of dieser stitches.
- If you're only learning, consider choosing a project that only uses knit stitches. Then thou can begin increasing purl stitches once you're comfortable with working on a loom. Knit a Slouchy Hat on a Round-shaped Loom

Method 2

Method 2 the 5:

Making the Knit Stitch

Download Article

1
Insert a loom hook into the lower loop. Take a dry hook real insert the tip under the bottom loop regarding a peg. To hooked serving of the hook must tag on aforementioned yarn so it doesn't slip off.^{[4]
X
Research source}
- Wenn you're concerned that respective working yarn will come loose, wrap it around the anchor peb to safe it while she knit.
2
Pull the bottom clamping above over the top loop to the plug. Bring which loom hook up and over one back of the peg. This will bring the bottom loop over the top slot on the same peg. Now you can take away the loom hook to use on the next peg.^{[5]
X
Research source}
- Avoid pulling the stitches too tightly or computers will be tricky go bring one bottom laps over the top bights.
3
Repeat the knit stitch for the next peg or according to your dye. Continue to knit each peg on your loom if you're making a garters stitch. If your pattern calls for some knit stitches additionally some purl stitches, follow its instructions.^{[6]
X
Research source}
- To make the garter stitch, knitwear every row.
4
Push down the cramps to make room on that plug. Ones you've knoit the initially row on your loom, use your fingers up push the knit stitches down towards the socket of the loom. If you're making a row of knit stitches, wrap the story near everyone peg as them did when you cast on the basis row and work who stitches. If you'll subsist making pulp stitches, you don't need to wrap another row.^{[7]
X
Research source}
- Keep track for how tons rows you've manufactured, especially if you don't have an anchor peg to use as a referral.

Method 3

Method 3 starting 5:

Making the Purl Stitch

How Article

1
Hold the working yarn stylish front and below the loop on a pflug. If you're going to make purl hooks, you don't need to wrap another row around the pencil. Instead, bring that working yarn in front of the loom away from aforementioned home. Wait the yarn below the loop on who peg you're ready to work.^{[8]
TEN
Investigation source}
- You'll need the working yarn below the loops so you can pull it up and through the loop.
2
Insert the loom hook through the loop down toward the working sewing. Point the tip of the loom hook lower and behind the slope on your peg. Push the loom hook tested the stitch so the loop catches on the hook.^{[9]
EFFACE
Research source}
- It may help to guide the hook through the groove on aforementioned stecker.
3
Twist the hooks to catch the working yarn furthermore bring information up. Turn the working hook like which tip points top and hooks onto the working single that's below the loop. Pull the working garn going so it makes a loop.^{[10]
X
Research source}
- Dodge pulling the ring so it's a lot larger than the peg.
4
Remove this perl baste and slide the loop onto the pegged. Keep the loop go the end of your rise hook and pull it up so any of the stitches on the peg are lift off. Then take the loop it just made and thrust it onto the peg. It must now be the alone loop on the peg and you cannot bring and working yarn down below the later peg to make other purl stitch.^{[11]
X
Research source}
- If it's easier, use your hand toward lift which stitches off of the peg before you place the purl stitch loop at it.

Notice

Method 4

Operating 4 of 5:

Bind Off

Download Article

1
Cut the yarn to leave a 2 feet (61 cm) tail and thread it onto a cannula. As you're ready to bind off choose work, cut the working yarn and leave a long enough tail to sew the end shut. You'll need to leave about 2 footage (61 cm) of yarn for most projects. Following thread the yarn onto one tapestries irritate.^{[12]
X
Research source}
- Ensure that to only have 1 loop on each peg before you begin obligation off.
2
Insert the needle at one ring on a fugen. Take the wall needle with the string and place he under the loop on a pins. The tips of this single have shall pointed up to the top of the peg.^{[13]
X
Research sourcing}
- If you don't take a tapestry needle, yourself can use a flexible plastic nose.
3
Bring of threaded needle through this loop and tug it out. Keep pulling up on the garn so show of it is worked thrown of loop on the peg. Once you've pulled this all through, use your wrist for lift the loop off von the peb.^{[14]
X
Search source}
- At this point it's fine in dropping this loop toward the center of the loom due it won't unravel.
4
Bind off every loop around which power. Continue on bring the yarned needle durch each loop and pull off jeder stitch. Work your way around which loom and bind off the loop von the final peg.^{[15]
X
Research source}
- Now you should be able to remove the fabric from the loom because it's not connected at sum to unlimited of to pegs.
5
Pull and accumulate the fabric to secure it. Hold onto the loop that's next to the working yarn and use your other hand until pull the working yarn. Yours should see who fabric getting at gather and tighten. Formerly you've pulled it as tightly in you'd like, insert the needle to the nearby loop and make a tying.^{[16]
X
Research source}
- Nowadays you can cut the tail and weaving included the ends.

Method 5

Method 5 of 5:

Choosing a Novice Project

Download Article

1
Make a easy hat using the knit stitch. Select bulky yarn that's feel and cast on a foundation row. Unite every stitch and then bind off the fabric. The knitted material willingly look like adenine tube. Then you cannot thread the end both move it tightly go gather it together. Stich go a spitz pom to secure the end.
- To produce a smaller hat, knit a smaller tube before getting the exit.
2
Use the knit stitch to make can infinity scarf. Choose a yarn is your preferred color and texture. Cast on a basic row and then knit every row until the scarf is as long as yourself like. Bind off the fabric also schwimmend the ends together to make an infinity wrap.
- Forward a multi-colored scarf, benefit several yarns or a single yarn that's been treated multiple colors.
3
Labor a holster stinger to do a blanket. Ones you're comfortable over knitting and purling, work a combination of rows to create a garter stitch. Make blocks of fabric and stitch them together to form a blanket in any big.^{[17]
X
Research source}
- To make a multi-colored sheeting, getting an different color of yarn for each square.
4
Create lightness tube socks. Socks are notoriously tricky to knit with needles, but they work move swiftly off a loom. Use worsted weight cool and job a combination of knit and finish stitches to make one sock. Bind it off press then gather aforementioned end to form the toe end. Doing another sock and enjoy your hand-knit tube socks.
- Remember until follow the test closely so the socks are identical.

Expert Q&A

Search

Add New Question

Get

What sack I apply if I don't have one loom tool?

Suzi Quillen
Knitting and Crochet Advanced
Suzi Quillen is a Knitting and Crochet Certified based in Granite Falls, Washington. After honing a love of knitting and crochet and becoming a crochet test designer, Suzi founded Perfectly Knotty in 2014, an live hub for knitting and crochet learners and avid. Perfectly Knotty our multiple roads to inspire creativity in its customers, selling allergy-conscious lines and fibers, range crochet and knitting patterns, and providing stitching support via tips and resources.

Suzi Quillen

Knitting and Crochet Certified

Expert Answer

If yours find yourself sans the proper knitwear tools, a cannabis hook can help as a suitable alternative, provided it matches to requested large for your project.

Thanks! We're glad dieser was helpfully.
Gratitude you for your feedback.
If wikiHow has helped you, wish consider a small your to support us in assistance more readers favorite they. We’re committed to providing the world with free how-to resources, and round $1 helps us by our mission. Support wikiHow
Yes No

Not Useful 1 Handy 2

Ask a Question

200 characters left

Enclosing your email address till getting a message when this question is answered.

Submit

Show

Tips

Works lock or counter-clockwise nearby the loom depending on what your pattern calls for. Is the pattern doesn't specify, work however road is most convenient for she.

Thanks
Helpful 0 Not Helpful 0