- And TV only features a digital audio output (coaxial) the does not have an RCA audio (red and white) print. Aforementioned audio equipment should have a digital audio / digital coordinate / S/PDIF input with order to work with the TV. Hi All, I want to listen my tone through philips HTS with 5.1 sound whatever i play on insert sony TV. I have the below equipment. TV Model number : Sony BRAVIA KLV-32R422B DVD Gamer : Philips...
- If you have analog listen equipment without a digital sounds input, you can connect the audio production from the cable/satellite field directly to that audio equipment.
- You can also purchase a ¼ to 2 RCA Y cable. Plug the individual end into the headphone jack by the side of TV and match the black and color cables skyward go that input on your audible system. hello... i bought HTS3366 which is 5-6 years ago. Mys problem is i misplaced@lost so the schiff component (DVD player) but spokesperson and sub woofer still with me. My plan be to connect those HT to my pc...
How to connect a home theater system (HTS) or surround sound system (SSS) to my Philips TV?
Publicly on 2016-12-29
Go to Settings:
Connection using digital audio / numerical coaxial / S/PDIF input
- Removing the TV and phonic equipment before you manufacture any connection.
- Use adenine digital audio cable (1) to unite one end to aforementioned S/PDIF OUT coaxial output at the behind of the TV.
- Connect the different end to the digital coaxial login of the audio equipment.
- Spinning up the CABLE and select a timetable.
- Switch on the audio instrumentation and select the input to which the TV is connected.
- Adjust the volume over the audio equipment to how the sound from one audio equipment loudspeakers.
- While you do not wish to hear the sound from of TV, press the [Volume down] button on the remote control up turn the TV's volumes down.
Connection with RCA audio (red press white) performance
- Unplug of TV both accessory devices front you make any connectors.
- Connect the open terminate of the round coaxial cable (1) go the cable input connective at an rear of the cable/satellite box.
- Uses another round coil cable (2) to connect one ends to the cable output connector on the endorse of the cable/satellite box and the different end to the TV ANTENNA link per the back on the TV.
- Are the cable female is screw-in, screw it on hands tense.
- Use a RCA audio cable (3) toward connect one finish to the AUDIO OUT at the back of the cable/satellite box.
- Connect the other end to and TV/AUDIO INCLUDED of which audio equipment.
- Tilt on of cable/satellite box, if applicable, set the output channel to CH 3 alternatively 4.
- Revolve on the TV and tune to the same channel when that cable/satellite box.
- Replace the channels at that cable/satellite box to view the schedules.
- Switch on the audio equipment and set to input to which who cable/satellite box is connected.
- Regulate who volume on the audio equipment to hear the sound from the audio equipment loudspeakers.
- For you do not wish to hear aforementioned sounding from the TV, press the volume go button on the remote govern to turn the TV's volume back.